Present information, advertisements and branding in a new way, shape and form. The distinctively versatile M2901SCBN Stretch Screen LCD is an improvement from our first generation stretch screen by adding HD compatibility as well as an RJ-45 port for internet connectivity. Approximately half the height of a traditional LCD display, the M2901SCBN allows for a variety of installation options from retail environments to stadiums to quick serve restaurants. Liven up a store front with striking product ads. Enhance a directory in a lobby or flight information with animated content. Whatever the task, you can stretch your possibilities with the LG Stretch Screens.
A. LG Monitors have an RS232 control port to allow remote access for on/off, switching inputs etc. The commands and format of these commands is listed in the Appendix of the operator manual for each Monitor type. A sample test program with notes for RS232 control is available at www.lgrs232.com.
A. eZ-Net Manager is a Digital Signage solution that allows easy control of one or more monitors via a network or serial connection. Simply load the eZ-Net Manager application from the CDROM that normally is included with the monitor and use it to control the monitor.
A. To use LG Monitors in Tile mode, one needs to daisy chain the displays together . currently, using the RGB-IN and RGB-Out for each Monitor. Newer mopdel Montors will allow other inputs/outputs to be used i.e. DVI.
Connect the originating content input to the first Display "RGB-IN then connect the "RGB-OUT of that display to the 2nd display "RGB-in" and so on.
Using the Remote Control, access the Menu display for each Monitor and select "Tile"
Turn Tile mode on to the desired setting 1X2 , 3X3 etc.
Select Tile ID (1 = first display, 2 = second etc) left to rightt and bottom to top.
These settings will now divide the input content between the numbered displays to create a tile/wall.
Many LG Monitors have power saving modes that save power by blanking the display when no signal is present on the selected inputs for a period of time.
This is usually a selectable option on the Monitors.
Access the Monitor Menu using the Remote Control.
On some models the DPM is the power monitor setting that handles this.Verify the "DPM Select" option is "Off". This disables the power saving mode.
A.
Most LG monitors have the ability to turn on and off through a time schedule.
This function is normally found in the "Time" menu item. The on/off time and dates are selected by
Day of week, hour and minute. Verify the Clock in the Monitor is correctly set to insure correct on/off timing.
A. Currently, most LG monitors do not have battery back up for the clock/time. If main AC power is lost, the clock time must be manually set to the correct date/time.
A. LG monitors can display pictures, movies and play music if speakers are connected.
The main menu identifies an "USB" selection that allows selection of the pictures, movies or music found on a connected USB Flash Drive. Typical file types supported are Photo: jpg only, Music: mpeg,mp3,vob, Movies: mpeg1,2,4 and Divx.
Review the specific model operators manual for all files types available for each model.
A. IR pass thru pulses use pin 4 on the RS232 control port DB9 connector.
A. Digital inputs i.e. HDMI, are less affected by length than analog but it depends on data speed.and cable quality. Recommended not to exceed 50Ft for HDMI even with the best cables.
